REUTER-STOKES設計和制造關鍵型任務測量設備，用于精確的輻射測量，加壓和沸水反應堆監控，UV火焰檢測以及用于定向鉆井的井下傳感器。

REUTER-STOKES總部位于美國，在其廣泛的伽馬和中子探測技術產品組合的設計，制造和安裝方面提供了超過六十年的持續專業知識。REUTER-STOKES擅長于廣泛的研究，開發和生產用于各種輻射監測應用的高質量探測器。

REUTER-STOKES產品有：

傳感器

火焰?zhèn)鞲衅?

工業網絡安全

超聲檢查其

核儀器

校準儀器

REUTER-STOKES火焰追蹤器RS-FS-9001技術參數

REUTER-STOKES火焰追蹤器介紹

The Silicon Carbide (SiC) Flame Tracker dramatically improves  gas turbine performance while significantly reducing  maintenance requirements. Available for a variety of gas  turbines, the Flame Tracker flame sensor’s optical photodiode  is designed for use with multiple fuels, low NOx combustors  and steam injection. Reliable turbine operations for steam  injection applications require the sensitivity provided by  Flame Tracker.

Advantages

High sensitivity, fast response

Flame Tracker, with its SiC photodiode, has high sensitivity to  the longer UV wavelengths that easily penetrate the fog of fuel  and steam. This is advantageous over typical flame sensors  that are sensitive to only the short UV wavelengths. In addition,  the SiC sensor has an analog output with a very wide dynamic  range and rapid response time. These features offer the ability  to quickly—in less than 25 milliseconds—report flame status.  This means interruption-free service and improved  availability.

Reduced maintenance

The Flame Tracker flame sensor is equipped with quick  disconnect connectors, allowing sensor replacement time  to be reduced from hours to minutes. Its improved sensorcooling feature lowers the impact of surrounding heat and  extends the life of electronics.

Customized conversion kits

Customized flame sensor conversion kits are available for  all turbine configurations. These sensor enhancements  are mechanically and electrically interchangeable with  existing systems. The kit solution simplifies upgrading older,  maintenance-intensive systems to the superior performance  of the Flame Tracker.

Reliable, low voltage operation

Providing a 4–20 mA industry-standard output signal, the  Flame Tracker operates reliably with any fuel—with or without—  steam injection. Unlike older flame sensors that require high  voltage for operation, the Flame Tracker requires low voltage,  which eliminates special wiring and explosion-proof conduit  requirements.

Performance benefits

? Provides reliable operation when using any fuel

? Allows full operation during the water wash cycle

? Reduces maintenance time

? Operates on low voltage

? Provides rapid response to flameout

? Produces a wide dynamic range

? Customized conversion kits

? Meets all NFPA guidelines for flame detection on  gas turbines

? Delivers 10 times the sensitivity of tube-style sensors

碳化硅（SiC）火焰追蹤器可顯著改善燃?xì)廨啓C性能，同時顯著降低維護要求。 Flame Tracker火焰?zhèn)鞲衅鞯墓鈱W(xué)光電二極管可用于多種燃?xì)廨啓C，設計用于多種燃料，低NOx燃燒器和蒸汽噴射。蒸汽噴射應用中渦輪的可靠運行需要Flame Tracker提供的靈敏度。

優點

高靈敏度，快速響應

帶有SiC光電二極管的Flame Tracker對較長的UV波長具有高靈敏度，該波長很容易穿透燃料和蒸汽的霧氣。相對于僅對短紫外線波長的典型火焰?zhèn)鞲衅鞫?，這是有利的。此外，SiC傳感器具有模擬輸出，該模擬輸出具有非常寬的動態范圍和快速的響應時間。這些功能提供了在不到25毫秒的時間內快速報告火焰狀態的功能。這意味著無中斷服務和更高的可用性。

減少維護

Flame Tracker火焰?zhèn)鞲衅髋鋫淞丝焖贁嚅_連接器，可將傳感器的更換時間從數小時縮短至數分鐘。其改進的傳感器冷卻功能降低了周圍熱量的影響，并延長了電子設備的使用壽命。

定制的轉換套件

定制的火焰?zhèn)鞲衅鬓D(zhuǎn)換套件可用于所有渦輪機配置。這些傳感器增強功能可以與現有系統在機械上和電氣上互換。該套件解決方案簡化了將舊的維護密集型系統升級到Flame Tracker的性能的過程。

可靠的低壓運行

火焰跟蹤器提供4–20 mA工業標準輸出信號，可在任何燃料（有或沒有蒸汽噴射）的情況下可靠運行。與需要高電壓才能運行的舊式火焰?zhèn)鞲衅鞑煌?，F(xiàn)lame Tracker需要低電壓，這消除了特殊的布線和防爆導管的要求。

性能優勢

?使用任何燃料時均可提供可靠的運行

?允許在水洗過程中完全運行

?減少維護時間

?低壓運行

?快速響應熄火

?產生寬廣的動態范圍

?定制的轉換套件

?符合有關燃?xì)廨啓C火焰檢測的所有NFPA準則

?靈敏度是管狀傳感器的10倍

REUTER-STOKES火焰追蹤器其他常用型號：

REUTER-STOKES RS-FS-9004

REUTER-STOKES RS-FS-9001

REUTER-STOKES Flame tracker NEW + ORIGINAL+ ONE YEAR WARRANTY

愛澤工業集產品開發、設計、制造、銷售、服務于一體，代理經營世界先進的電氣自動化、機械與傳動、流體控制、儀器儀表、工具等產品。作為電氣，液壓以及氣動解決方案的合作伙伴，我們利用我們的全球協作團隊，為客戶提供先進解決方案，市場知識以及相關增值服務來幫助優化客戶的工作效率，提高可靠性和安全性，致力于成為工業產品和解決方案的優質渠道。

如果有任何關于REUTER-STOKES火焰追蹤器RS-FS-9001的疑問，請隨時與我們溝通（021-31006702）。我們將盡全力解決您的問題。

If you have any question for REUTER-STOKES products, please feel free to dial 0086-21-3100 6702/ send request email to [email protected] / browse our website: www.ize-industries.com.

聯系方式：

愛澤工業專業代理，特價銷售，認真，細心，高效率服務！

聯系電話：021-31006702 021-35350722 

聯系傳真：021-35350711

手    機：189 1750 1433

郵    箱：[email protected]

公司網址：www.ize-industries.com

REUTER-STOKES火焰追蹤器RS-FS-9001技術參數